Premium Vinyl Lettering

Dry Mount Method

• 01
  

  Prepare surface

  The process starts with preparing your surface. It's important to wipe clean all application surfaces with an alcohol-based cleaner. This will rid the surface of any harmful material that may be lingering around. Additionally, the room temperature should be between 45° and 90° Fahrenheit before beginning the application process. The target site for your lettering should not be too humid, as it could negatively impact the application.

• 02
  

  Tape Your Decal

  After your surface is properly prepared, apply a strip of masking tape on the top of your custom vinyl graphic. This will ensure that it stays in place during application.

• 03
  

  Remove Wax Liner

  Flip over the decal and hold the bottom edge of the graphic away from the application surface. Then expose the sticky vinyl backing by removing the wax liner.

• 04
  

  Squeegee the Decal

  Use the included squeegee to press the vinyl letters on the area where you want them to appear, going from top to bottom in the motion of a windshield wiper. Be careful not to trap any pockets of air under the decal. This would create unsightly bubbles.

• 05
  

  Remove the Transfer Tape

  After you remove the top layer of paper, your letters will appear in place. Your new lettering will serve as a way for your customers to always have visibility of your company name, logo and/or products. It's really a great way to make a permanent mark in your community. If you have any questions about your lettering order please call our customer service tam and we will walk you through the steps.