Product Description
Outdoor rated, safe to use without a protective awning
Our 30W x 36H Outdoor Enclosed Bulletin Board is better than the competitors because it is outdoor rated and it is safe to use without a protective awning or overhang. This redesign is a SIGNIFICANT UPDATE of our previous model. The bulletin board's frame casing is sealed in the back with an plastic moisture barrier and silicone sealant. The door includes a weather striping door gasket to protect against driving rains and there are vents on each side for humidity to escape. A synthetic, moisture resistant tack board is covered with a UV treated vinyl fabric so it is completely moisture resistant. Your bulletin board will not wick any rain, snow or sleet!
Built to last in harsh weather conditions
Our competitors use the bulletin board to hold their frame casing together, thus you cannot replace it without destroying it. Our display case corners are mitered and reinforced with locking brackets. The frame casing is constructed with a natural satin extruded anodized aluminum frame, which is manufactured with alloy 6063-T6, a superior metal for signage because of its strength, hardness and corrosion resistance. Built to last in harsh weather conditions, the casing is heavier than the indoor models and is backed with an plastic covered panel that acts as a moisture barrier and includes a weather resistant silicone sealant.
LED wide angle illuminated pods
This sign is illuminated from around the inside perimeter of the cabinet with wide angle LED lights that spill illumination across the viewing area. LED lights provide longer life, better illumination and are less expensive to operate. The 10,000 hour, UL listed, LED wide angle illuminated pods are driven with a mounted LED power supply. The wires from the power supply are left prepped for a trained electrician to hardwire with 110 volts. The lighting is attached to the inside of the case and is covered by framing so it is not exposed to the viewing area. The unit uses LED lights which are widely available and easily replaced.
Easy to install without ruining your new cabinet
Easy to install so that your cabinet sits plum and your doors swing flush. First attach a hangers (provided) to your wall and place the bulletin board sign cabinet on the hangers. Mark location for the upper hangers, remove the sign cabinet and install the upper hangers to the wall. Place the cabinet between the wall hangers and attach with screws provided. The installer will have to provide the appropriate wall fasteners based on type and thickness. Includes mounting hardware (no wall fasteners).
Ventilation holes dissipate the heat
Two louvered moisture vents are fastened and sealed through the sides of the cabinet. There are open drip holes in the bottom of the casing. Our ventilation holes dissipate the heat; otherwise the cabinet becomes an oven and damages your postings and posting surface. The ventilation holes equalize any temperature differences in the cabinet to prevent window fog up. The vents are capped to prevent insects like spiders and wasps from climbing in the cabinet and building their nests. The vent caps need 1-1/2" to breath and cannot be covered up by side posts or recessed cavities.
Protects against fading
A top-quality, vinyl laminate is applied to 7/16 inch synthetic tackboard which forms the posting surface and backboard of the sign. The UV vinyl laminate protects against fading while creating a stylish posting surface. Our competitor's boards fade in direct sunlight which creates ghosted images from previous bulletins. The synthetic posting board is sealed with an aluminum moisture barrier and silicone sealant.
Shatter-resistant, high-impact acrylic window
The door includes two solid disc tumbler locks to protect against vandalism while controlling access to posting surface. The locking mechanism is clipped in place. Two keys are included. The door frame holds a durable, 1/8 inch shatter-resistant, high-impact acrylic window with UV inhibitors so messages can be seen but not touched. The window frame sits in a mechanically fastened channel. This makes the window easy to replace if vandalized.
Full length piano hinge
This one door unit is mounted with full-length piano hinges. The case dimensions are 30W x 36H and 3-1/8 inch depth. The main case frame is 1 inch wide and the door frame is 1-7/16 inch. This reduces the visible area to 25W x 31.13H, an optional header further reduces the visible area. The interior space between the door and the cork board is one and three-quaters inch.
Manufacturer guarantee
This item comes with a one year manufacturer's guarantee. Added options take an extra 7-10 business days lead time to produce.
